Charging Instructions - Jensen SMPS-625 User Manual

Bluetooth wireless stereo speaker
Table of Contents

Advertisement

6. SPEAKERS
7. POWER OFF/BLUETOOTH AND AUX SWITCH
8. CHARGING JACK (mini USB jack)
9. POWER/CHARING INDICATOR
10. AUX-IN JACK
11. BATTERY COMPARTMENT DOOR
12. BATTERY COMPARTMENT
This unit operates on a rechargeable Li-ion battery (included). Open the Battery
Compartment Door. Follow the engraved diagram inside the Battery Compartment to
properly install the battery. After installing the battery correctly, close the Battery
Compartment Door. The unit can now be recharged either using the USB port on
your computer or from a USB power adaptor (not included) with a rated output of DC
5V, 500mA and up.
CAUTION:
1. Make sure the battery is installed correctly.
2. Replace only with the same or equivalent type of battery.
Note: The CHARGING JACK located on this unit is only designed for charging the
Li-ion battery.
CHARGING THE BATTERY FOR FIRST TIME
1.) Charge the Li-ion battery a minimum of 3 hours prior to first use.
Plug the unit into a USB port on your computer or into a USB power adaptor
(not included) using the included USB cable.
2.)
The POWER/CHARGING indicator will be red while charging. When the light

CHARGING INSTRUCTIONS

E3

Advertisement

Table of Contents
loading

Table of Contents