Power Saving; Care And Maintenance; Specification - Jensen SMPS-626 User Manual

Waterproof bluetooth shower speaker
Table of Contents

Advertisement

Notes:
If you connect
to adjust the VOLUME +/- BUTTON (#7/6) of the SMPS-626. If you connect to the
Headphone Jack of your external device, you may need to adjust both the volume
controls of your external device and
Remember to turn off the SMPS-626 when you are done listening. Don't forget to turn off
the power of your external audio device as well.
The unit will automatically go into power saving mode after 15 minutes if no music is playing,
or if the music is left in pause mode when it is at Bluetooth mode
You can reset the speaker by press and hold the TALK / TWS BUTTON #5 by 10 seconds,
the light ring would flash in white 3 times and turn OFF. All memory including the TWS
speaker and paired mobile device would be cleared
1. Do not subject the unit to excessive force, shock, dust or extreme temperature.
2. Do not tamper the internal components of the unit.
3. Clean your unit with a dry cloth. Solvent or detergent should never be used.
4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
5. Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect your unit from the AC power source when
cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture,
Use caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or
polish sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft
cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or
polishes, as these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.
Power requirement:
Please visit us at
green initiatives or to find a recycler in your area.
the
SMPS-626 to the Line-Out Jack of your external device, you only need

POWER SAVING

RESET THE SPEAKER

CARE AND MAINTENANCE

SPECIFICATION

DC input:
Battery
At Spectra, environmental and social responsibility is a core
value of our business. We are dedicated to continuous
implementation of responsible initiatives with an aim to conserve
and maintain the environment through responsible recycling.
http://www.spectraintl.com/green.htm
the
SMPS-626 to obtain the desirable listening level.
DC 5V
1A (micro USB)
built-in rechargeable Lithium-ion battery
for more information on Spectra's
E-6

Advertisement

Table of Contents
loading

Table of Contents