Care And Maintenance; Troubleshooting Guide - Jensen SMPS-622 User Manual

Note: Always slide the Power switch to the OFF position when not in use to prevent
draining the internal battery. Don't forget to switch off the power of your external
device as well.
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2. Keep your unit away from heating appliances and sources of electrical noise such
as fluorescent lamps or motors.
3. Unplug the unit from the electrical power outlet immediately in case of malfunction.
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect your unit from the USB port of power
source when cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other
furniture, Use caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax
or polish sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned
with a soft cloth slightly dampened with a mild soap and water solution. Never use
abrasive cloths or polishes as these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while
cleaning.
Symptom Possible Problem
AC Adaptor is not
plugged into a wall
outlet or the
connector is not
plugged into the
No power supply jack
on the back of the
Charging
unit.
Wall outlet is not
functioning.
Computer USB port
is not functioning.
Speaker batteries
No Sound
are dead
Bluetooth speaker
is not linked with
the cell phone

CARE AND MAINTENANCE

TROUBLESHOOTING GUIDE

Solution
Plug the AC adaptor into a wall outlet
and plug the connector into the supply
jack on the unit.
Plug another device into the same
outlet to confirm the outlet is working.
Make sure your computer power is
turned on and try another USB port.
Recharge the speaker batteries
Go through "Bluetooth Operations"
process to link the speakers.
11