Inventory - Grizzly G0622 Owner's Manual

Inventory

After all the parts have been removed from the
two boxes, you should have the following items:
Box 1: (Figure 3)
A. Bandsaw (not shown) ................................. 1
B. Stand Legs ................................................. 2
C. Tool Tray .................................................... 1
D. Corner Support Braces .............................. 4
E. Wheels ....................................................... 2
F.
Axle ............................................................ 1
G. Wheel Mounting Bracket ............................ 1
H. Work Stop Rod ........................................... 1
I. Work Stop ................................................... 1
J.
Transport Handle ........................................ 1
K. Pulley Cover ............................................... 1
L. V-Belt .......................................................... 1
M. Pulleys w Keys ........................................... 2
N. Table .......................................................... 1
O. Table Support ............................................. 1
Hardware Bag (not shown)
• Hex Wrench 4mm (Work Stop) .................. 1
• Hex Bolt M8-1.25 x 20 (Saw to Stand) ...... 6
• Hex Nut M8-1.25 (Saw to Stand) ............... 6
• Flat Washer 8mm (Saw to Stand) .............. 6
• Lock Washer 8mm (Saw to Stand) ............ 6
• Hex Bolt M6-1 x 12 (Stand) ........................ 8
• Phillips Head Screw M6-1 x 12 (Tray) ....... 4
• Hex Nut M6-1 (Stand, Tray, Table) .......... 13
• Flat Washer 6mm (Stand, Tray) ............... 12
• Fender Washer 6mm (Table) ..................... 1
• Flat Head Screw M6-1 x 10 (Table) ........... 1
• Cotter Pins (Axle & Handle) ....................... 4
G0622 4" X 6" Metal Cutting Bandsaw
B
Qty
K
Figure 3. Model G0622 Inventory.
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
Some hardware/fasteners on the inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss-
ing.
G
D
F
O
N
E
H
I
M
L
NOTICE
SUFFOCATION HAZARD!
Immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.
C
J
-11-