Blade Speed - Grizzly G0622 Owner's Manual

Figure 23. Squaring vise to blade.
4.
Loosen the lock nut on the opposite jaw so
the jaw can float, and match the angle of the
workpiece.
5. Tighten the vise against the workpiece.
Note: Figure 24 shows correct methods of
holding different workpiece shapes.
Figure 24. Workholding options by material
shape.
G0622 4" X 6" Metal Cutting Bandsaw

Blade Speed

The bandsaw is capable of operating at 78, 108,
or 180 FPM. The speed can easily be adjusted by
changing the V-belt placement. Figure 25 shows
an illustration of each pulley to belt combination,
and the following list provides the blade speeds
in feet per minute.
�����������
�
�
Figure 25. Pulley & V-belt configuration.
Belt Position
A ..............................................................78 FPM
B ............................................................108 FPM
C ............................................................180 FPM
������������
�
Blade Speed
-21-