Table of Contents
Advertisement
Setup Menu
When you select Setup from the Main Menu, this screen is displayed. Use it to gain
access to the Setup option screens that are described in the table below.
OCP
Volume
The volume of the OCP touch pad can be adjusted within a range of 0 to 5.
The factory default is 3.
Contrast
The contrast of the OCP can be adjusted within a range of 1 to 16. The factory
default is 10.
Service
The Service option is used by an Authorized Service Technician and is password
protected.
System
The System option is password protected. Contact your System Administrator for
access to these options.
Reset
Press to reboot the printer.
Software Log
Press to create a software log. A power cycle is required after creating the log.
Parallel
Network
Defines the parameters of the network. The network is displayed as
10/100/1000 (AUX). Other Network parameters include: IP Address, Subnet
Mask, Gateway Address, Boot Method, HTTP Port
Calendar
Time Zone - GMT -12:00 to GMT +12:00.
Date - 0000/00/00 (Year/Month/Day)
Time - Set printer clock
Operator Control Panel 2-15
Advertisement
Table of Contents
Troubleshooting
