Paper Smoothness; Paper Fusing; Moisture - Ricoh DDP70E-92 User Manual

Paper Smoothness

Paper smoothness affects print quality and paper handling. Paper should not have a
rough texture. A rough texture provides poor toner adhesion, particularly in "black fill"
areas. Neither should the paper be too smooth, as this can also affect toner adhesion.
Paper that is too smooth has inadequate friction and can cause paper handling
difficulties. Do not use paper with embossed or raised surfaces. Spotty printing and
misfeeding may occur. Refer to
information.

Paper Fusing

Paper used in the printer must withstand the effects of the fusing process. It should not
melt, discolor, vaporize, offset, or delaminate at the following temperature for 1/2
second: 205

Moisture

Moisture affects both paper curl and print quality. Excessive moisture can cause the
following things:
Wavy edges
Tight edges
Paper curl
Faded printing
An increase in humidity can cause paper to develop wavy edges. This occurs because
the edges absorb moisture while the rest of the ream remains unaffected. This can cause
paper skewing and inability to pick paper. Wave is measured as shown below. Do not
use paper with a wave of more than 2 mm.
If there is a decrease in humidity the edges can lose moisture. This causes them to
contract resulting in tight edges. Tight edges are measured as shown below. Do not use
paper with tight edges of more than 6 mm.
"Paper Specifications" on page C-2
o o
C (401 F).
for additional
Less than 2 mm
Less than 6 mm
Paper Specifications C-5