Triax TSC 114 Operating Manual page 14

When a recording has been initialised, the front
panel LED's will flash slowly between red and
blue. This shows the current programme is being
recorded. Pressing "i" displays the information on
the current recording.
Pressing the stop button while recording, will
prompt a 'Confirm Stop Rec' message and
resume normal playback.
When recording, you can also use the "REC"
button to set a timer to stop recording, pressing
"REC" again allows you to reset the timer.
If there is insufficient memory space while
recording, the system will show a prompt
message, stop recording and resume normal
playback mode.
If a recording fails due to memory storage
problems, the system will show a prompt
message and try again.
During recording, you can also operate the
Menu, EPG, TTX, Subtitle and so on, as if in
normal playback mode.
Time Shift Mode
Time Shift Mode is only available when an
external HDD is connected to the receiver.
(Not supplied)
(1) In time shift mode, you can pause a live
programme.
14