PRECAUTIONS Read these instructions You should read all the safety and operating instructions before using this product. Heed all warnings You must adhere to all the warnings on the product and in the instruction manual. This symbol highlights several areas of concern. Please read descriptions next to each symbol carefully.
Page 4
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
1.2 Features and Benefits This IP CCD D/N PoE Box Camera is a cutting-edge digital video transmission device. It can compress and transmit real time images with outstanding image quality (D1, 720x480) at reasonable bandwidth through a standard TCP/IP network. That is because it is Ethernet ready and has the powerful ARM9 SoC with excellent system performance to offer dual streams of MPEG4/MJPEG, and both formats offer megapixel resolution.
Page 9
Powerful Bundled Surveillance Software To extend the capabilities of the IP CCD D/N PoE Box Camera series, a powerful surveillance program is included in the package and is free to use. Users can easily utilize an existing PC to be a digital video recorder.
1.3 Safety Instructions Don’t use the power supply with other voltages This device is likely to be damaged or damage other equipments / personnel if you use a power supply with a different voltage than the one marked on this device. All warranty of this product will be voided in the above situation.
Page 11
If the video product does not operate normally by following the operating Instructions in this manual. Adjust only those controls that are covered by the instruction manual, as an improper adjustment of other controls may result in damage, and will often require extensive work by a qualified technician to restore the video product to its normal operation.
1.4 Physical Description DC Iris DC Iris Lens Control Port Analog Video Output The IP CCD D/N PoE Box Camera supports one channel analog video output. Ethernet Port The IP CCD D/N PoE Box Camera connects to the Ethernet via a standard RJ45 connector.
Page 13
disconnecting the power cable Step 2: Press and continue to hold the Reset Button with a pointed object. Reconnect the power cable while still holding the reset button. Step 3: Keep the reset button depressed for at least 6 seconds before releasing it.
The I/O terminal pins are numbered left to right, as shown below. Connect input/output devices to the camera as follows: 1. Attach the cables for the device securely to the supplied green connector block. 2. Once the cables are connected, push the connector block into the terminal connector (also green) on the camera.
1.5 Basic Connections Follow the procedures below to connect the IP CCD D/N PoE Box Camera to the respective apparatuses. 1. Connect the power adaptor to IP CCD D/N PoE Box Camera 2. Connect IP CCD D/N PoE Box Camera’s ethernet port to an Ethernet (RJ45 connectors).