Turning Power On/Off; Sound Mute Function; Sound Volume Adjustment; Sources Selection - Alpine TMX-R1100E User Manual

BASIC OPERATION

Turning Power ON/OFF

Sensor Touch Control
1. Touch the POWER to turn on the system.
2. Touch the POWER for at least 2 seconds
to turn off. If touch the POWER while
operating, the sound level will be muted.
POWER SELECT
Remote Control
1. Press POWER to turn on.
2. Press POWER for at least 2 seconds to turn
off the power.
Remote Control Unit

Sound Mute Function

Sensor Touch Control
1. Operate MUTE function by touching at POWER
button while the power is on.
2. Touch POWER again to turn off the MUTE
function.
Remote Control
Press POWER button to switch between ON
and OFF.

Sound Volume Adjustment.

Sound Volume can be adjusted through optional
IR Headphone or Radio Head Unit.
1. Turn on the POWER of the optional IR Head-
2. Turn clockwise to increase the volume and
DIM.
(DIMMER)

Sources Selection.

1. Press SEL button at the Remote Control or touch
2. Input Sources will be switched when press SEL
Brightness Setting for
Blacklight.
LCD Panel Backlight can be adjusted to be as close
as Cabin Light level. By doing this, the screen will
be even more eye-friendly.
1. Press DIMM (DIMMER) on the Remote Control
2. Every successive press at DIMM (DIMMER)

Variable Indirect Lamp Brightness Setting

The brightness of Variable Indirect Lamp can be
adjusted.
1.Close the LCD Panel or turn the POWER OFF
2.Touch on the
The faintest brightness will be turning the light off and
the brightest level will be noticed by a beep sound.
phone Unit.
counter clockwise to decrease.
Adjust by DIAL adjust at IR Headphone.
SELECT at the Sensor Touch Control.
(SELECT) or touch SELECT as below.
Input 1 Input 2
(DVD)
(DTV)
•
The default setting will be as shown in ( ____ ).
•
The OSD (On Screen Display) will be automatically
turned off if there is no operation within 10 seconds.
or touch at DIMMER of Sensor Touch Control.
or touch at DIMMER will adjust the OSD level
from LOW, MIDDLE, HIGH - - - consecutively.
(Default value is HIGH).
Low
Mid
LOW MID
(STANDBY).
/ button of the Sensor Touch
Control to adjust the brightness.
: Brightness will be increased when touch.
: Brightness will be decreased when touch.
High
HIGH
6