Checking The Backup Battery - ThinkPad X200 Hardware Maintenance Manual

Checking the backup battery

Do the following:
1. Power off the computer, and unplug the AC adapter from it.
2. Turn the computer upside down.
3. Remove the battery pack (see "1010 Battery pack" on page 83).
4. Remove the backup battery (see "1060 Backup battery" on page 97).
5. Measure the voltage of the backup battery. See the following figure.
v If the voltage is correct, replace the system board.
v If the voltage is not correct, replace the backup battery.
v If the backup battery discharges quickly after replacement, replace the system
54
ThinkPad X200 and X200s Hardware Maintenance Manual
Red (+)
Black (-)
board.
Wire Voltage (V dc)
Red +2.5 to +3.2
Black Ground