2020 Inverter Card Or Led Board - ThinkPad X200 Hardware Maintenance Manual

2020 Inverter card or LED board

For access, remove these FRUs in order:
v "1010 Battery pack" on page 83
v "2010 LCD front bezel" on page 131
Table 28. Removal steps of inverter card or LED board
134
ThinkPad X200 and X200s Hardware Maintenance Manual
1
Step Screw (quantity)
M2 × 3.5 mm, wafer-head, nylon-coated (1) Silver
1
When installing: Make sure that the connector 2 and 4 are attached firmly.
Cabling: When replacing the inverter card or the LED board, route the
connector cable as in this figure.
2
3
4
Color Torque
0.181 Nm
(1.85 kgfcm)