ThinkPad X200 Hardware Maintenance Manual page 127

Table 23. Removal steps of base cover assembly for ThinkPad X200s (continued)
Step Screw (quantity)
M2 × 3.5 mm, wafer-head, nylon-coated (4) Silver
4
M2 × 3 mm, large-head, nylon-coated (1)
5
In step 6 and 7 , remove the system board, the DC-in connector, and the fan
assembly together from the base cover assembly.
When installing: Attach the wireless radio switch as shown in the figure a .
4
5
4
4
a
4
Color Torque
0.181 Nm
(1.85 kgfcm)
Silver 0.181 Nm
(1.85 kgfcm)
6
7
Removing and replacing a FRU
119