Table of Contents
Advertisement
Rear View
Network Connector
Connect 10Base-T Ethernet or
100Base-TX
Fast
cable.
Terminal Block
Connect external devices such as sensors and alarm
devices, or power external devices through the camera; See
Appendix F for details.
3: Installation Summary and Examples
1. Connect the Ethernet and power to the Pro Series Network Camera.
2. Install and launch the IP Installer program on the enclosed CD.
3. Assign an IP address and network settings.
4. Securely mount the camera. Owners of the indoor fixed dome camera need to refer to the
included Hardware Installation guide.
5. Adjust the lens focus.
Installation Example: Wired Camera
Power Connector
Input connector for external
Ethernet
12 V DC Power supply.
12
RS232 Connector
Serial
port
connection
HyperTerminal
access;
Appendix B.
for
See
Advertisement
Table of Contents
