Wi-Fi Settings - Zte MF29A User Manual

Profile Selection: Choose the desired profile name.
•
APN: Access Point Name.
•
• PDP Setting: PDP address mode. If a fixed IP address is given by your service provider, select Manual
PDP. Otherwise select the Auto PDP and the router will automatically obtain this parameter.
DNS: If a fixed IP address is given by your service provider, then choose Manual DNS. Otherwise,
•
choose Auto DNS, and device will automatically obtain parameters.
Authentication: Password Authentication Protocol (PAP) provides a simple method without encryption
•
for the peer to establish its identity using a 2-way handshake. Challenge-Handshake Authentication
Protocol (CHAP) is used to periodically verify the identity of the peer using a 3-way handshake.
User Name: User name is used to obtain authentication from the ISP when the connection is established
•
Password: Password is used to obtain authentication from the ISP when the connection is established.
•
Click Set default to set this profile as the default profile.

Wi-Fi Settings

Station list
Select Settings > Wi-Fi Setting > Station List, the wireless network stations are shown in the following
figure:
17