Firewall - Zte MF29A User Manual

WPA Algorithm: TKIP, AES or AUTO.
•
Pass phrase: You can input hexadecimal digits up to 64 characters or input ASCII characters choose a
•
length of 63 characters or less.
Key Renewal Interval: Define how long the key should be renew.
•
You can set Wireless MAC Filtering:
Wireless Disable: If disabled, MAC address is not used to control network access.
•
Wireless Allow: Set the MAC address that is allowed to access network.
•
Wireless Reject: Set the MAC address that is not allowed to access network.
•
Click Apply to confirm your configuration.
WPS
Select Wi-Fi Setting > WPS, the WPS configuration is shown in the following figure:
Select Enable, click Apply ,the WPS settings are shown in the following figure:
WPS Summary, WPS Progress and WPS Status are all shown in the figure.
To set WPS, select WPS mode, the two modes are described below:
PIN: Set the client's PIN code in Client PIN field.
•
• PBC: Press the WPS button of the router or select PBC, and then click Apply. Press WPS button on the
client wireless adapter within two minutes, and the negotiation process will be established.

Firewall

You may setup firewall rules to protect your network from virus, worm and malicious activity on the
Internet.
22