Star Trac Upright Sport Bike Owner's Manual page 11

Assembling the Recumbent Bike
Use the following steps to assemble the Recumbent Sport Bike.
1. Install Neck assembly
Slide the neck shroud onto the neck assembly. Mate the neck assembly cable con-
nector with the cable in the Sport Bike frame, then carefully slide the neck assem-
bly into the frame.
C
AUTION
neck assembly into the frame.
Secure the neck assembly to the frame using the two
screws and washers provided.
2. Install Seat
Stand the rear frame in an upright position, the slide the
seat assembly onto the rear frame. Assemble the rear
frame onto the main frame with the screws, washers,
spacers and seat stops provided. Remove shipping mate-
rials from seat as shown
STAR TRAC SPORT BIKE O
: Exercise care to avoid pinching the cables when installing the
' M
WNER S ANUAL
7