Installation; Chapter 2 Installation; Led Indicators; Table 2.1: Eki-2526Pi Led Definition - Advantech EKI-2526PI User Manual

Chapter 2
In this chapter, you will be given an overview of the EKI-2526PI hardware installation
procedures.

2.1 LED Indicators

There are few LEDs display the power status and network status located on the front
panel of EKI-2526PI, each of them has its own specific meaning as the table below.

Table 2.1: EKI-2526PI LED Definition

LED Color
P1 Green
P2 Green
P-Fail Red
PoE (1 ~ 4) Green
Green
Link/Active
(1~6)
Yellow
Duplex/Collision
(1~6)
EKI-2526PI User Manual-081105

Installation

Description
On Power input 1 is active
Off Power input 1 is inactive
On Power input 2 is active
Off Power input 2 is inactive
On Power input 1 or 2 is inactive
Off Power input 1 and 2 are both active, or no power input
A device is connected utilizing Power over Ethernet on the
On
corresponding port
Off No device attached or power over Ethernet function failed
On Connected to network
Flashing Networking is active
Off Not connected to network
On Ethernet port full duplex
Flashing Collision of packets occurs
Off Ethernet port half duplex or not connect to network
8