Installation Guide - CyberPower RMCARD202 User Manual

CyberPower Network Management System

INSTALLATION GUIDE

Step 1. Hardware Installation
Internal smart slot network management card (RMCARD202)
1. Turn off the UPS before removing the expansion port cover on the UPS.
2. Remove the two retaining screws from the expansion port cover and remove the cover.
3. Install the CyberPower Network Management Card into the expansion port.
4. Re-install and tighten the retaining screws.
5. Connect the Ethernet cable to the LAN port on the CyberPower Network Management
Card.
6. Turn on the UPS.
3