CyberPower RMCARD202 User Manual page 15

CyberPower Network Management System
Using NTP server: Enter the IP address/domain name of NTP servers, choose the time zone,
and set the frequency to update the date and time from NTP server. Choose "Update right now"
to update immediately.
[System->Identification] Assign the system's name, contact, and location.
Items
Name
Contact
Location
[System->Security] Sets for security.
Items
Timeout
[System->Event Action] Displays the event actions for each event. You can set the event
actions to execute when the specific event occurs. The following events actions can be setup.
- Log : Record the event if the "Event Logs"
- E-mail : Sent a email to specific user.(An available SMTP server is necessary)
- Trap : A SNMP trap sent to a specific IP address.
[System->SMTP Server] After setting the proper SMTP server, the UPS can send an email to
users when specific event occurs.
Items
Server's IP/Host Name
Sender's E-mail Address
Authentication
Username
Password
[System->E-mail Recipients] Set up to five e-mail recipients in designated email address
format. The Recipients will receive an e-mail notification when events occur.
[System->Trap Receivers] Set up to ten trap receivers in the IP format. The receiver will receive
a SNMP trap when an event occurs. When the PowerPanel Business Edition Client connects to
the CyberPower UPS, the IP address of the PowerPanel Business Edition Client will be added
the list of Trap Receivers automatically.
The name used to identify the UPS.
The person to be contacted for issues..
The location of the UPS.
The period (in minutes) that the system waits before
auto logging off
The name of the UPS used for identification.
The person to contact when an email is sent.
Select this option if the SMTP server needs
Authentication check.
Username used for Authentication.
Password used for Authentication.
13
Definition
Definition
Definition