Billy Goat GZ401H Operator Owner's Manual
  1. Manuals
  2. Brands
  3. Billy Goat Manuals
  4. Lawn and Garden Equipment
  5. GZ401H
  6. Operator owner's manual

Billy Goat GZ401H Operator Owner's Manual

Grazor
Hide thumbs Also See for GZ401H:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
8" HEAVY DUTY
REPLACEMENT
BRUSH P/N 600172.
OEM quality replacement
wire brush.
DRIVE BELT
P/N 610420.
Original Equipment Belt
for replacement.
ENGINE PULLEY
P/N 610417.
Original Equipment Pulley
for replacement.
BRUSH DRIVE PULLEY
P/N 610403.
Original Equipment Pulley
for replacement.
Engine: HP
Engine:Type
Engine: Fuel cap.
Engine: Oil Cap.
W eight: Unit
W eight: Shipping
Part No. 610428
T h a n k Y o u f o r S e l e c t i n g
The Billy Goat Grazor
Operator Owner's Manual
GZ401H & GZ451S

Specifications

4.0 HP (2.98 kW ) 4.5 HP (3.36 kW )
HONDA OHV
2.1 qt. (2.0 L)
0.63 qt. (0.6 L)
84 # (38.1 Kg)
92 # (41.7 Kq)
®
For Models:
GZ401H
GZ451S
SUBARU OHV
3.0 qt. (2.9 L)
0.63 qt. (0.6 L)
85 # (38.5 Kg)
97 # (44.0 Kq)
Page 1 of 12
Form No. F101005A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GZ401H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Billy Goat GZ401H

Summary of Contents for Billy Goat GZ401H

  • Page 1: Specifications

    P/N 610403. Original Equipment Pulley for replacement. T h a n k Y o u f o r S e l e c t i n g The Billy Goat Grazor ® Operator Owner's Manual For Models: GZ401H & GZ451S...

  • Page 2: Table Of Contents

    IN THE INTEREST OF SAFETY BEFORE STARTING ENGINE, READ AND UNDERSTAND THE “ENTIRE OPERATOR'S MANUAL & ENGINE MANUAL.” THIS SYMBOL MEANS WARNING OR CAUTION. DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY. The engine exhaust from this product contains chemicals known to the State of California to cause WARNING! cancer, birth defects or other reproductive harm.

  • Page 3: General Safety

    (Item 54), and nut (Item 52) on the operators left hand side. Use the same hardware to secure the flat end of the handle brace Your Billy Goat is shipped from the factory in one carton, (Item 42) to the left side of the handle.

  • Page 4: Labels

    PARTS BAG & LITERATURE ASSY CONTROLS PARTS BAG ASSEMBLY CHECKLIST HONDA ENGINE THROTTLE CONTROL Literature Checklist THROTTLE LEVER Check Owner's Manual 610428 Check Warranty Card 400972 Safety Glasses 610129 Qty. 1 FUEL VALVE CHOKE LEVER SUBARU ENGINE THROTTLE CONTROL THROTTLE LEVER CHOKE LEVER FUEL VALVE INSTRUCTION LABELS...

  • Page 5: Operation

    OPERATION IMPORTANT GENERAL SAFETY Like all mechanical tools, reasonable care must be used when operating machine. INSTRUCTIONS Before operating this machine, be sure the operator Inspect machine work area and machine before operat- has familiarized himself with Safety and Operating ing.
  • Page 6 OPERATION continued OPERATING HINTS: OPERATION 16.3 1. Do not operate product when barefoot or wearing A side-to-side sweeping motion is the quickest way to open sandals. Always wear safety footwear, pants or remove surface vegetation from crevices, even if deeper slacks that cover your legs.
  • Page 7 OPERATION continued Brush usage Recommendations Pressure – Avoid excessive pressure when using a power brush. Excessive pressure causes over- bending of the filaments and heat build-up resulting in filament breakage, rapid dulling and reduced brush life. Instead of greater pressure on a brush, it is suggested that you try: 1) a brush with a more aggressive cutting action (increased wire size, decreased filament length, change to a different brush type, i.e., knot type...

  • Page 8: Maintenance

    DISCONNECT SPARK PLUG WIRE 5. Install new brush over the shaft. NOTE: Be sure that to BEFORE SERVICING UNIT. use the nylon bushing that comes with the Billy Goat replacement brush to insure proper fit between the brush ENGINE: See engine manufacturer and the shaft.
  • Page 9 MAINTENANCE 17.4 CHANGING PULLEYS NOTE: Pulleys should be replaced in pairs and not individually to obtain the maximum service life from you unit. 1. Wait for engine to cool and disconnect spark plug. 2. Remove the belt by following the Belt Replacement procedure on the preceding page.

  • Page 10: Parts Drawing & List

    PARTS DRAWING GZ401H, GZ451S Part No. 610428 Form No. F101005A Page 10 of 12...
  • Page 11 PARTS item GZ401H GZ451S PARTS LIST LIST Part No. Part No. Bushing P ivot Frame 360183 360183 Label Hot E ngine 400268 400268 Grip Handle 1" X 13" 400570 400570 Screw Self Tap 1/4-20 X 5/8 Type F 890359 890359...

  • Page 12: Troubleshooting

    Engine Service and Warranty WARRANTY PROCEDURE 22.1 Please fill in the WARRANTY CARD and send the upper part to Billy Goat. Contact your nearest engine manufacturer's authorized The WARRANTY terms are stated on the lower part which remains with the servicing dealer.

This manual is also suitable for:

Gz451s

Table of Contents