Personalizing Your Telephone's Ringing Pattern; Selecting A Personalized Ringing Pattern - Avaya 4602 User Manual

Telephone Management and Troubleshooting
Feedback (Handset) Tones
Intercept/Time-out -_-_-_-
Recall Dial - - - -----------
Reorder -- -- -- -- -- --
Ringback ---- ---- ---- ----

Personalizing Your Telephone's Ringing Pattern

The Select Ring feature lets you choose your own personalized ringing pattern
from among eight different patterns.

Selecting a personalized ringing pattern

1. With the phone on-hook, press the Conference (
The current ringing pattern sounds and repeats every three seconds.
2. Continue to press (and then release) the Conference (
cycle through each of the eight ring patterns.
3. To save a ringing pattern as it plays, do not continue to press the
Conference (
You hear the selected ringing pattern two more times, after which it is
automatically saved. A confirmation tone (two rising tones) sounds and
your new ringing pattern is set.
NOTE:
Going off-hook, receiving a call or losing power during ring pattern
selection interrupts the process, and you must start over from Step 1.
Personalizing Your Telephone's Ringing
Meaning
Alternating high and low tone indicating
either a dialing error, denial of a requested
service or failure to dial within a preset
interval (usually 10 seconds) after lifting
the handset or dialing the previous digit.
Three shorts tone bursts followed by a
steady dial tone to indicate a feature
request has been accepted and dialing
can start.
Fast busy tone repeated every
half-second to indicate all phone trunk
lines are busy.
Low-pitched tone repeated 15 times a
minute to indicate the number dialed is
ringing.
) button for at least seven seconds.
Issue 1.8 November 2003
Pattern
3
3
) button.
) button to
3-3