OPERATIONAL INSTRUCTIONS
USING THE ELECTRONIC METER
POWER ON:
Pedal movement or press the button.
POWER OFF:
Automatic shut off after four minutes of inactivity.
FUNCTION BUTTON:
Press and release to select functions.
Press and hold for two seconds to reset all functions except distance
to zero. Distance is cumulative from workout to workout so it does
not reset to zero.
FUNCTIONS:
SCAN:
Automatically scans TIME, DISTANCE, COUNT, and CALORIES in sequence with a change
every six seconds. Press and release the button until "SCAN" appears on the display.
TIME:
Displays the time from one second up to 99:59 minutes.
DISTANCE:
Distance traveled is saved from prior workouts and cumulative workout distance is displayed
from zero to 999.9 miles. This function does not reset to zero with each workout.
COUNT :
Displays the total number of strides you have taken from zero to 9999 strides.
CALORIES:
Displays the calorie consumption from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a comparison
between workouts on this unit.
NOTE:
The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Press the button and hold it down for two seconds to reset all functions to zero
except distance.
BATTERY
The meter operates with a 1.5v LR44 mercury battery. Replace the battery when you see inconsistencies in
the display.
PRECAUTIONS FOR USING
1.
To maintain your balance, always mount or dismount the InMotion
refer to the following illustrations. Loss of balance may result in a fall and serious bodily injury.
2.
Use a wall or a table to help to maintain your balance while using the InMotion
familiar with the InMotion
E1000.
CORRECT
E1000 from the lowest foot pedal,
8
E1000 until you are
INCORRECT