Table of Contents
Advertisement
OPERATIONAL INSTRUCTIONS
USING THE FITNESS METER
POWER ON :
Pedal movement or press the button.
POWER OFF :
Automatic shut off after four minutes of
inactivity.
FUNCTION BUTTON:
Press to select the function value displays of TIME, DISTANCE,
and CALORIES.
Reset all functions to zero by pressing the button and holding
it down for four seconds.
FUNCTIONS:
COUNT:
Displays the total number of strides you have taken on upper display from zero to 9999
strides.
SCAN:
Lower display automatically scans each function of TIME, DISTANCE, and CALORIES
in sequence every six seconds.
TIME:
Displays the time from one second up to 99:59 minutes.
DISTANCE:
Displays the distance from zero to 999.9 miles.
CALORIES:
Displays the calories burned from zero to 9999 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
NOTE:
The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Press the button and hold it down for four seconds to reset all functions to zero.
HOW TO INSTALL AND REPLACE BATTERIES:
1. Open the Battery Door on the back of the meter.
2. The meter operates with two AA batteries, the batteries are not
included. Refer to the illustration to install or replace the batteries.
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
3. Rechargeable batteries are not recommended.
11
AA Batteries
Advertisement
Table of Contents
