Operational Instructions - Stamina 55-1610B Owner's Manual

OPERATIONAL INSTRUCTIONS

USING THE FITNESS METER
POWER ON:
Pedal movement or press the button.
POWER OFF:
Automatic shut off after four minutes of inactivity.
FUNCTION BUTTON:
Press and release to select functions.
Press and hold for four seconds to reset all functions to zero.
FUNCTIONS:
SCAN: Automatically scans TIME, DISTANCE, COUNT, and CALORIES in sequence with a change
every six seconds. Press and release the button until "SCAN" appears on the display.
TIME: Displays the time from one second up to 99:59 minutes.
DISTANCE: Displays the distance from zero to 999.9 miles.
COUNT :
Displays the total number of strides you have taken from zero to 9999 strides.
CALORIES: Displays the calorie consumption from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
NOTE:
The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Push the button and hold it down for four seconds to reset all functions to zero.
BATTERY
The meter operates with a 1.5v LR44 mercury battery. Replace the battery when you see inconsistencies
in the display.
PRECAUTIONS FOR USING
1. To maintain your balance, always mount or dismount the InMotion® E1000 from the lowest foot pedal,
refer to the following illustrations. Loss of balance may result in a fall and serious bodily injury.
2. Use a wall or a table to help to maintain your balance while using the InMotion® E1000 until you are
familiar with the InMotion® E1000.
CORRECT
9
INCORRECT