Grizzly G9036 Owner's Manual page 47

Figure 77.
Figure 78.
To add oil to the reservoirs:
1.
2.
3.
4.
Changing Oil
Reservoir
NOTICE
Failure to follow lubrication guidelines will
lead to rapid deterioration of lathe compo-
nents.
Tools Needed
To change the oil in the reservoirs:
1.
2.
3.
Figure 76
Note: If, for some reason, you cannot remove
the fill plug, do not remove the drain plug,
until you can get the fill plug out.
4.
5.
6.
7.
8. Steps 3–7
Approximate Volume
Qty
Figure 76
Figures 77 & 78