Tool Post
To load the tool post:
1.
2.
3.
Figure 48
Figure 48.
4.
Steps 1–3
Spindle Speed
To calculate the correct spindle speed:
1.
Figure 49
Recommended Cutting Speeds
Rough Cuts
Note: These values are based on HSS cutting
tools. For carbide cutting tools, double the aver-
age speed. These values are a guideline only.
Refer to the MACHINERY'S HANDBOOK for
more detailed information.
Figure 49.
2.
Note: For this step, you will need to aver-
age out the diameters or work with the finish
diameter for your calculations.
Figure 49
Finish Cuts