Using Foot Pedal And Remote Control; Loading Film - Royal Sovereign RSC-1401CLTW Owner's Manual

8. USING FOOT PEDAL AND REMOTE CONTROL

USING FOOT PEDAL
P l a c e t h e f o o t p e d a l o n t h e f l o o r i n f r o n t o f t h e
m a c h i n e . O n c e a l l c o r r e c t s e t t i n g s a r e d i s p l a y e d ,
you may use the foot pedal to operate the laminator
for "Hands Free Operation." To activate the machine,
press the foot pedal once and then release. Repeat
to stop the rollers.
Royal Sovereign films are wound with the adhesive side facing the inside of the roll
(adhesive in).
Loading films to upper and lower film shafts:
(See page 5 for assistance with parts identification.)
1. Adjust the auto grip to fit to the film and tighten the
auto grip screw (Figure 1).
2. Remove the upper and lower film shafts from the
machine and load the films (Center the upper and
lower films on the shaft). Note the direction of the
adhesives on the lower and upper films
(Figure 2).
RSC-1401CLTW /RSC-1651CLTW

9. LOADING FILM

9 9
Figure 1
Figure 2