Dipswitch Settings - Alpha Communications STR QwikBus Installation, Programming, And User's Manual

Dipswitch Settings – Entries & Door Strikes
The QwikBus™ system uses dipswitches for identification of Entry stations, additional
cameras, and to enter "Programming Mode".
Entrance Panels must have a unique code so the system knows where the call is coming
from and which door to open. Dipswitches 4, 5, & 6 on the back of the Speaker/Microphone
Unit (TSMB3 (Modular style) or TT33 (Custom style)) assign this code as shown in the chart
below.
When a Door Strike is used, It can be connected locally to the TSMB3 (Modular style panels)
or TT33 (Custom style Panels) Tö terminals, or connected to the SP333 Controller at the
Tö1, Tö2, Tö3, or Tö4 terminals (number is related to the entry number). You must let the
system know which connection you will use by the position of the #3 dipswitch for each entry.
Dipswitch #3 = OFF (SP333) or ON (TSMB3 or TT33). The entries DO NOT have to be set
alike.
TSMB3 Dipswitch Location TT33 Dipswitch Location
10