Aastra DT390 User Manual page 96

For mx-one

Hide thumbs Also See for DT390:

Table of Contents

16.10

1424-EN/LZT 103 087 Uen F2 2012-03-02

Headset Profiles

In order to achieve optimal audio quality with the different headset types,

it is recommended that you select the corresponding profile. The default

setting is microphone on a boom, meaning that the audio is optimized for

using a headset with microphone on a boom.

To change the headset profile, do the following:

Press Menu, select

Select Headset and press Select

Select Mic on boom or Mic on cable, and press Select.

Press Back to save the setting.

If the pre-configured headset profiles do not match the headset in use,

or if the audio quality is low, it is possible to configure a new headset

profile. This is done in WinPDM or CPDM3 by the system administrator.

, and press Select.

ETTINGS

Table of Contents