Incoming Calls; Answering Calls - Aastra DT390 User Manual

C P
ORDLESS HONE FOR
6
6.1
31
MX-ONE™

Incoming Calls

An incoming call is indicated by a flashing indicator, accompanied by a
ring signal and a vibrating phone. The ring type tells you if the call is an
internal, external or callback call. Both ring signal and vibrator can be
disabled. The calling party's number or name, or both, is displayed.
The name of the caller will be shown if the calling party's phone number
is stored in any of the phonebooks. When a headset is connected to the
phone, the answering button on the headset can be used to answer the
call.
The 25 last received phone numbers are stored in the call list along with
the latest dialed and missed phone numbers, see Call List on page 44.

Answering Calls

When you receive a call, do the following to answer:
• Press
OR
• Press
You are connected to the caller via the loudspeaker.
OR
• Press the answering button on the headset.
Note: Calls can be answered at any time even during programming, or
while keying in a number. When the phone is in idle mode, you
can change the answering method, see Changing Answering
Methods on page 90.
Other answering methods, such as Automatically or Loudspeaking, can
be set from the Settings tab,
matic answering is enabled, an incoming call will be answered automat-
ically after approximately one second.
.
to answer in loudspeaking mode (handsfree).
, see Settings on page 85. When auto-
1424-EN/LZT 103 087 Uen F2 2012-03-02