Table of Contents
Advertisement
Your VS-808DS 8x8 Video Audio Matrix Switcher / Scaler
Table 2: VS-808DS 8x8 Video Audio Matrix Switcher / Scaler Rear Panel Features
#
Feature
16
AUDIO INPUT L RCA
Connectors
17
AUDIO INPUT R RCA
Connectors
18
EXT. SYNC BNC Connector
19
SYNC SELECT EXT. / IN 1
Pushbutton
20
VIDEO INPUT BNC
Connectors
21
AUDIO OUTPUT L RCA
Connectors
22
AUDIO OUTPUT R RCA
Connectors
23
VIDEO OUTPUT BNC
Connectors
24
RS-485 Terminal Block Port
25
RS-232 DB 9F Port
26
SCALER OUTPUT HD15
Connector
27
Dipswitches
28
Power Connector with Fuse
29
REMOTE IR 3.5mm Mini Jack
1 Usually not connected. If shielded twisted pair is used for RS-485, G may be connected to the shield
2 The signal that is converted via the scaled output is the input signal that is routed to output 8
3 Optional. Can be used instead of the front panel (built-in) IR receiver to remotely control the VS-808DS (only if the internal
IR connection cable has been installed)
6
Function
Connect to the LEFT audio sources (from 1 to 8)
Connect to the RIGHT audio sources (from 1 to 8)
Connect to an external SYNC
Press to select the external SYNC, release to select the SYNC
from input 1
Connect to the composite video sources (from 1 to 8)
Connect to the LEFT audio acceptors (from 1 to 8)
Connect to the RIGHT audio acceptors (from 1 to 8)
Connect to the composite video acceptors (from 1 to 8)
Pin G is for Ground connection
RS-485
Connects to the PC or the Remote Controller
Connects to the video acceptor that displays the scaled output
Dipswitches for setup of the unit (1, 2, and 3 are for setting the
Machine # (SELF ADDRESS), 4 is for RS-485 Termination, 5 is
for Reply, and 8 is for RS-232/RS-485 (see section 6.3)
AC connector enabling power supply to the unit
Connect to an external IR receiver unit for controlling the machine via
an IR remote controller (instead of using the front panel IR receiver)
1
; Pins B (-) and A (+) are for
KRAMER: SIMPLE CREATIVE TECHNOLOGY
2
3
Advertisement
Table of Contents
