Use Call Page Connect To Make An Announcement; Use Centrex/Exchange Switchhook Flash - Nortel i2004 User Manual

Additional Call Features

Use Call Page Connect to make an announcement

Use the Call Page Connect feature to make an announcement over a paging system.
Note: A Page key on an attendant console overrides and disconnects the telephones.
The telephones must re-access the page trunk.
To connect to Call Page:
To disconnect Call Page:

Use Centrex/Exchange Switchhook Flash

Use the Centrex/Exchange Switchhook Flash feature during an established call to use
a Centrex service, such as Call Transfer or Three-Way Calling.
To use Centrex/Exchange Line
Switchhook Flash:
CentrexSHF
56
1. Lift the Handset.
2. Dial the Page Trunk Access Code
complete the connection to the page
system.
3. Make your announcement.
4. Press the Goodbye
1. While in a call, press the
Centrex Switchhook Flash
A special dial tone sounds.
2. Dial the codes for your custom
feature.
3. Press the Goodbye
to
.
key
key.
Centrex
key to end the call.