Nortel i2004 User Manual page 70

Additional Features
Resume Normal Mode
Use the Resume Normal Mode command to return to Normal Mode after testing
survival functionality.
Note: If the Resume Normal Mode command is not performed after testing , the
telephone automatically returns to Normal Mode in ten minutes.
Resume Normal Mode
Select
Troubleshoot Branch Office
When using Branch Office you may see error messages on your screen. The
following table lists error messages and corrective actions.
Table 2: Troubleshoot Branch Office
Display Message
Local Mode
Local Mode
Invalid ID (1)
Local Mode
Invalid ID (2)
70
1. Press the
Services menu.
2. Using the
Resume Normal
3. Press the
registers back to the Main Office).
Probable Cause
Test Local mode.
Network problem.
Gatekeeper unable to
find end point from
Branch User ID.
Branch User ID not
found in any equipped
TN.
Services key to access the
Navigation key, highlight
Mode.
Select key (the telephone
Actions
Press Services key and
select Resume Normal
Mode.
Contact Local network
administrator if problem
persists.
Notify local network
administrator.
Notify local network
administrator.