Section 3: Set Up; Inventory - Grizzly G5954 Owner's Manual

Inventory

After all the parts have been removed from the
two boxes, you should have the following items:
Large Component Inventory (Figure 2)
A. Casters (shown attached to base plate) .... 4
B. Base Plate .................................................. 1
C. Motor/Fan Assembly .................................. 1
D. Stand Legs ................................................. 4
E. Collector ..................................................... 1
Small Component Inventory (Figure 3)
F.
Gasket ........................................................ 1
G. 4-in-1 Inlet Adapter and Inlet Caps ............ 1
H. Upper Bag Support Extenders ................... 2
I.
Lower Support ............................................ 1
J. Upper Bag Supports ................................... 2
K. Plastic Elbows 4" 90º ................................. 2
L. Lower Bags ................................................ 2
M. Upper Bags ................................................ 2
Other Components and Hardware
• Flange Bolts ⁄ -16 x
3
8
• Washers ⁄ " (D, E) ................................... 16
3
8
• Hex Nuts ⁄ -16 (C, E, F) ............................ 8
3
8
• Hex Bolts 3 ⁄ -16 x 1
8
• Flange Bolts ⁄ -18 x
5
16
• Hex Nut ⁄ -11 (I) ......................................... 1
5
8
• Flange Bolts ⁄ -20 x
1
4
• Lower Support Foot Pad
• Open-End Wrench 10/12mm ...................... 1
• Bag Clamps ................................................ 4
NOTICE
Some hardware/fasteners on the inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss-
ing.
-10-

SECTION 3: SET UP

Qty
Qty
Qty
⁄ " (A, B, C, D) ........ 32
1
2
1 ⁄ " C, E, F) ................... 8
4
⁄ " (I, J) ................... 6
3
4
⁄ " (H, J) ................... 4
1
2
⁄ -11 ................... 1
5
8
C
A
B
Figure 2. G5954 Large Component Inventory.
H
G
F
M
Figure 3. G5954 Small Component Inventory.
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
G5954 5HP Dust Collector
E
D
I
J
K
L