Grizzly G1029Z Instruction Manual
Grizzly G1029Z Instruction Manual

Grizzly G1029Z Instruction Manual

Grizzly instruction manual 2.5 micron 2 hp dust collector model g1029z
Hide thumbs Also See for G1029Z:

Advertisement

MANUAL INSERT
Model G1029Z
2.5 Micron 2 HP
Dust Collector
INTRODUCTION
The Model G1029Z is the same dust collector as
the Model G1029, but with the upgrade of the 2.5
micron top bag.
For the Model G1029Z, please follow all safety,
adjustment, and operation instructions from the
Model G1029 instruction manual.
INVENTORY
The Model G1029Z is shipped with the same
parts shown in the Model G1029 instruction
manual, except for the 2.5 micron top filter bag.
REPLACEMENT PARTS
All replacement parts for the Model G1029Z are
the same as the Model G1029, except for the 2.5
micron top bag. Therefore, please refer to the
included Model G1029 manual when ordering new
parts, unless you need to order a replacement 2.5
micron top bag for your machine, which is listed
below.
Figure 1. G1029Z Dust Collector.
2.5 Micron Top Bag ................ Part # P1029Z027
If you need additional help with this machine, call
our service department at: (570) 546-9663.
COPYRIGHT © NOVEMBER, 2003 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR5871 REVISED OCTOBER, 2004. PRINTED IN TAIWAN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G1029Z and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Grizzly G1029Z

  • Page 1 Model G1029Z 2.5 Micron 2 HP Dust Collector INTRODUCTION The Model G1029Z is the same dust collector as the Model G1029, but with the upgrade of the 2.5 micron top bag. For the Model G1029Z, please follow all safety, adjustment, and operation instructions from the Model G1029 instruction manual.
  • Page 2: Dust Collector

    DUST COLLECTOR MODEL G1028Z/G1029 INSTRUCTION MANUAL COPYRIGHT © 1991 BY GRIZZLY IMPORTS, INC.REG # TX 3170576 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY IMPORTS, INC. REVISED FEBRUARY, 2002. PRINTED IN TAIWAN...
  • Page 3 WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. •...
  • Page 4: Table Of Contents

    1. SAFETY SAFETY INSTRUCTIONS FOR POWER TOOLS ...2 ADDITIONAL SAFETY INSTRUCTIONS FOR DUST COLLECTORS ...4 2. CIRCUIT REQUIREMENTS G1028Z ...5 G1029 ...5 GROUNDING ...6 EXTENSION CORDS ...6 3. INTRODUCTION COMMENTARY...7 UNPACKING ...8 PIECE INVENTORY ...8 CLEAN UP...9 SITE CONSIDERATIONS ...9 4.
  • Page 5: Section 1: Safety

    G1028Z/G1029 Dust Collector VISITORS...
  • Page 6 14. USE RECOMMENDED ACCESSORIES. Consult the owner’s manual for recom- mended accessories. The use of improper accessories may cause risk of injury. G1028Z/G1029 Dust Collector 15. DO NOT OVER-REACH. Keep proper 16. REDUCE THE RISK OF UNINTENTION- 17. MANY WOODWORKING TOOLS CAN...
  • Page 7: Additional Safety Instructions For The Dust Collector

    Additional Safety Instructions For 1. THIS DUST COLLECTOR IS TO BE USED FOR WOOD DUST COLLECTION ONLY. Do not use this dust collector to pick up liq- uids and metal scrap including, but not lim- ited to, nails and filings. Metallic debris will contact the spinning impeller and could spark.
  • Page 8: Section 2: Circuit Requirements

    SECTION 2: CIRCUIT REQUIREMENTS G1028Z Wiring The G1028Z Dust Collector is pre-wired for 110V, but can be rewired for 220V. Refer to the wiring diagram included with this manual for instruction. Do not attempt to rewire the motor if the diagram is missing.
  • Page 9: Grounding

    If you are unsure about the correct installation or modification of electrical circuits, please consult the advice of a qualified electrician. Failure to do so could result in serious personal injury. G1028Z/G1029 Dust Collector...
  • Page 10: Introduction Commentary

    SECTION 3: INTRODUCTION Commentary Grizzly Industrial, Inc. is proud to offer the Model G1028Z/G1029 Dust Collector. These dust col- lectors are a part of Grizzly’s growing family of fine machinery. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s commitment to customer satis-...
  • Page 11: Unpacking

    Unpacking The Model G1028Z/G1029 Dust Collector is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you’ve signed for delivery, please call Customer Service immediately for advice. Save the containers and all packing materials for possible inspection by the carrier or its agent.
  • Page 12: Clean Up

    Remove this protective coating with a solvent cleaner or citrus-based degreaser such as Grizzly’s G7895 Degreaser. Avoid chlorine-based solvents as they may damage painted surfaces should they come in contact. Always follow the usage instructions on the product you choose for clean up.
  • Page 13: Section 4: Assembly

    Mount the casters to the base plate using sixteen (16) ⁄ adjust- loose clothing after they Base "-18 x ⁄ " hex bolts provided. See Figure 2. Figure 2. Mounting casters to base. G1028Z/G1029 Dust Collector...
  • Page 14: Collector Body

    (4) ⁄ provided. Figure 3. Mounting collector to base. G1028Z/G1029 Dust Collector The outlet can now be attached to the main col- lector body. Insert the rubber gasket between the collector and lower outlet flange and secure using eight (8) See Figure 4.
  • Page 15: Support Brackets

    Secure with two (2) 18 x Collector ⁄ "-18 x ⁄ " hex bolts provided. ⁄ " bolts provided, as shown in Figure 6. Figure 6. Mounting collector to brackets. G1028Z/G1029 Dust Collector ⁄ "-...
  • Page 16: Flex Hose

    Tighten each hose clamp until snug as shown in Figure 7. Figure 7. Attaching flex hose. G1028Z/G1029 Dust Collector Bags Hook the top loop of the filter bag over the support bracket as shown in Figure 8.
  • Page 17: Inlet

    -14- Inlet Press the “Y” inlet onto the inlet cover flange as shown in Figure 11. The inlet is secured to the collector body by a press-on fit. Figure 11. Installing “Y” inlet. G1028Z/G1029 Dust Collector...
  • Page 18: Section 5: Designing The System

    Model G1028Z/G1029, great flexibility is possible in the planning and designing of your dust collection duct layout. Grizzly offers a complete line of dust collection accessories for setting up a stationary system. Additionally, Grizzly offers a complete guide book entitled Dust Collection Basics.
  • Page 19: Plastic Duct

    However, the cost of specifically designed flexible duct can vary greatly. Grizzly offers polyethylene hose which is well suited for the removal of particulate matter, especially saw- dust, since it is durable and completely flexible.
  • Page 20 Copper Ground Wire Figure 12. Ground jumper wire when using plastic blast gates and metal duct. G1028Z/G1029 Dust Collector We also recommend wrapping the outside of all plastic ducts with bare copper wire to ground the outside of the system against static electrical build up.
  • Page 21: Design Suggestions

    The best way to plan your new system is to draw a bird’s eye view (as shown in Figure 14) of your shop and sketch the following: Your desired location of the dust collector, usually in a corner or along a wall. The location of each machine in the system.
  • Page 22: Operations Test Run

    Press the START button. Make sure that your fin- ger is poised on the STOP button, just in case there is a problem. The dust collector should run smoothly, with little or no vibration or rubbing nois- es. Strange or unnatural noises should be investi-...
  • Page 23: Section 7: Maintenance

    Grizzly G5955 or G9956. Air filters are designed to collect the smaller dust particles that a dust collector bags cannot trap.
  • Page 24: Section 8: Closure

    G1028Z/G1029 Dust Collector We recommend you keep a copy of our current catalog for complete information regarding Grizzly's warranty and return policy. If you need additional technical information relating to this machine, or if you need general assistance or replacement parts, please contact the Service Department listed in Section 3 Introduction.
  • Page 25: Wire Diagram

    GREEN GROUND WIRE, ARE INTERCHANGEABLE, THEREFORE COLORS ARE NOT SPECIFIED. -22- WIRE DIAGRAM 110 VOLT MOTOR WIRES BLACK YELLOW WHITE 220VOLT MOTOR WIRES YELLOW BLACK GREEN (GROUND) TO 110 VOLT POWER SUPPLY WHITE GREEN (GROUND) TO 220 VOLT POWER SUPPLY G1028Z/G1029 Dust Collector...
  • Page 26: Machine Data

    Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 GRIZZLY MODEL G1028Z/G1029 DUST COLLECTOR Design Type:...Single Stage - Upright on Casters Overall Dimensions: Base ...21 Height ...78" Intake Hole Size, G1028Z...6" Intake Hole Size, G1029 ...6"...
  • Page 27: Parts Breakdown And Parts Lists

    -24- 6A (G1029) 6 (G1028Z) G1028Z/G1029 Dust Collector...
  • Page 28 29B P1029029B Y-INLET 6" X 4" X 4" 29A P1029029A INLET CAP 6" G1028Z/G1029 Dust Collector PART # DESCRIPTION P1028001 CASTER PFB01 FLANGE BOLT P1028004 BASE PLATE PS06 PHLP HD SCR 10-24 X P1028Z006 INLET COVER (G1028Z) P1029006A INLET COVER (G1029)
  • Page 29: Warranty And Returns

    WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
  • Page 30: Warranty Card

    Do you think your purchase represents good value? ___Yes Would you recommend Grizzly Industrial to a friend? ___Yes Would you allow us to use your name as a reference for Grizzly customers in your area? Note: We never use names more than three times. ___Yes Comments:_________________________________________________...
  • Page 31 FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE Send a Grizzly Catalog to a friend: Name_______________________________ Street_______________________________ City______________State______Zip______ TAPE ALONG EDGES--PLEASE DO NOT STAPLE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 Place Stamp Here...

This manual is also suitable for:

G1028zG1029

Table of Contents

Save PDF