Grizzly G0852 Owner's Manual
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Dust Collector
  5. G0852
  6. Owner's manual

Grizzly G0852 Owner's Manual

1.5hp quiet cyclone dust collector
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL G0852 1.5HP QUIET
CYCLONE DUST COLLECTOR
OWNER'S MANUAL
(For models manufactured since 12/18)
265752
COPYRIGHT © FEBRUARY, 2019 BY GRIZZLY INDUSTRIAL, INC., REVISED AUGUST 2019 (JL)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
V1.08.19
#KB19640 PRINTED IN TAIWAN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G0852 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Grizzly G0852

Summary of Contents for Grizzly G0852

  • Page 1 (For models manufactured since 12/18) 265752 COPYRIGHT © FEBRUARY, 2019 BY GRIZZLY INDUSTRIAL, INC., REVISED AUGUST 2019 (JL) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
  • Page 2 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.

  • Page 3: Table Of Contents

    Table of Contents INTRODUCTION ..........................2 Contact Info ..........................2 Manual Accuracy ........................2 Identification ..........................3 Machine Data Sheet ........................4 SECTION 1: SAFETY ........................6 Safety Instructions for Machinery ....................6 Additional Safety for Dust Collectors ..................8 SECTION 2: POWER SUPPLY ......................

  • Page 4: Introduction

    ID label (see below). This information is required for us to provide proper tech support, and it helps us determine if updated documenta- tion is available for your machine. Manufacture Date Serial Number Model G0852 (Mfd. Since 12/18)

  • Page 5: Identification

    Collection ON/OFF Impeller Switch Housing 6" x 4" x 4" Motor Dust Inlet Adapter Base Stand Swivel Caster (Locking) Swivel Caster To reduce your risk of serious injury, read this entire manual BEFORE using machine. Model G0852 (Mfd. Since 12/18)

  • Page 6: Machine Data Sheet

    MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0852 1.5 HP QUIET CYCLONE DUST COLLECTOR Product Dimensions: Weight................................247 lbs. Width (side-to-side) x Depth (front-to-back) x Height..............36-1/2 x 55 x 78 in.
  • Page 7 The information contained herein is deemed accurate as of 8/15/2019 and represents our most recent product specifications. Model G0852 PAGE 2 OF 2 Model G0852 (Mfd. Since 12/18) Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

  • Page 8: Section 1: Safety

    Never operate under the influence of drugs or injury or blindness from flying particles. Everyday alcohol, when tired, or when distracted. eyeglasses are NOT approved safety glasses. Model G0852 (Mfd. Since 12/18)
  • Page 9 Make sure they are properly installed, you experience difficulties performing the intend- undamaged, and working correctly BEFORE ed operation, stop using the machine! Contact our operating machine. Technical Support at (570) 546-9663. Model G0852 (Mfd. Since 12/18)

  • Page 10: Additional Safety For Dust Collectors

    Make sure you know be exposed to rain or moisture, which creates a what type of wood dust you will be exposed to in shock hazard and will reduce life of machine. case of an allergic reaction. Model G0852 (Mfd. Since 12/18)

  • Page 11: Section 2: Power Supply

    Nominal Voltage ..208V, 220V, 230V, 240V meets the specified circuit requirements. Cycle ............60 Hz Phase ........... Single-Phase Power Supply Circuit ......15 Amps Plug/Receptacle ......NEMA 6-15 Model G0852 (Mfd. Since 12/18)
  • Page 12 The plug must only be inserted into a matching receptacle (see following figure) that is properly installed and grounded in accordance with all local codes and ordinances. -10- Model G0852 (Mfd. Since 12/18)

  • Page 13: Converting Voltage To 240V

    Wire Nut (14 AWG x 3) ....... 1 and Tighten and Tighten • Plug 6-15 ............ 1 • Wire Cutters/Stripper ........1 To convert Model G0852 to 240V: Start DISCONNECT MACHINE FROM POWER! Capacitor Capacitor 300MFD 50 uF Cut 120V 5-15 plug from power cord.

  • Page 14: Section 3: Setup

    (or other you are completely satisfied with the machine and lifting equipment) rated for have resolved any issues between Grizzly or the weight of this machine. shipping agent. You MUST have the original pack- aging to file a freight claim. It is also extremely helpful if you need to return your machine later.

  • Page 15: Inventory

    "-18 ........12 lost in packaging materials while unpack- AK. Fender Washers ⁄ " ........6 ing or they are pre-installed at the factory. AL. Phillips Head Screw 10-24 x ⁄ " ....1 -13- Model G0852 (Mfd. Since 12/18)

  • Page 16: Site Considerations

    Only install in an Shadows, glare, or strobe effects that may distract access restricted location. or impede the operator must be eliminated. 55" = Electrical Connection " Figure 8. Minimum working clearances. -14- Model G0852 (Mfd. Since 12/18)

  • Page 17: Assembly

    Front Leg Thread (2) 3" swivel casters into base stand, then tighten hex head on caster threads (see Figure 10). Swivel Casters Figure 12. Lower right front leg installed. Figure 10. Swivel casters installed. -15- Model G0852 (Mfd. Since 12/18)
  • Page 18 Tighten in star pattern. and (4) ⁄ " fender washers (see Figure 14). Square Gasket Braces Intake Barrel Upper Cover Figure 14. Leg braces installed. Intake x 12 Barrel Figure 16. Upper cover attached to intake barrel. -16- Model G0852 (Mfd. Since 12/18)
  • Page 19 " hex bolts and (8) ⁄ " flat washers (see Figure 18). Finger-tighten for now. Cyclone Funnel Figure 19. Cyclone funnel attached to intake barrel. Collection Bag Lid Figure 18. Collection bag lid mounted to cyclone funnel. -17- Model G0852 (Mfd. Since 12/18)
  • Page 20 Figure 23. 6" vacuum hose attached to intake barrel and impeller housing exhaust port. Motor/ Impeller Housing Dust Intake Port Figure 21. Dust intake port, exhaust port, and switch box attached to motor/impeller housing. -18- Model G0852 (Mfd. Since 12/18)
  • Page 21 " hex bolts and (2) ⁄ " flat washers (see Figure 26). Figure 24. Canister filter mounted to upper Upper cover. Cover Filter Brush Handle Assembly Figure 26. Filter brush handle assembly installed on canister filter. -19- Model G0852 (Mfd. Since 12/18)
  • Page 22 " collection bag around collection bag lid and secure with 17 ⁄ " metal clamp (see Figure 28). Collection Bag Lid ⁄ " Clamp Collection Figure 28. Collection bag attached to collection bag lid. -20- Model G0852 (Mfd. Since 12/18)

  • Page 23: Test Run

    To test run machine: STOP Paddle Clear all setup tools away from machine and connect to power source. Figure 30. Dust-collection motor ON button and Lock casters so machine will not move. STOP paddle. -21- Model G0852 (Mfd. Since 12/18)

  • Page 24: Section 4: Designing A System

    Plastic duct is also a popular material for home shops. However, be aware that there is a fire or The Model G0852 works great as a central sys- explosion hazard if plastic duct material is not tem for a small shop or a dedicated dust collector properly grounded to prevent static electrical for a medium-sized production machine.
  • Page 25 However, the cost of specifically Avoid inferior metal duct that requires you to cut it designed flexible duct can vary greatly. Grizzly to length and snap it together. This type of duct is offers polyethylene hose, which is well suited for...

  • Page 26: System Design

    Line Duct Our Workshop Planner will allow you to quickly and easily design and print a basic shop layout. Don't worry, non-Grizzly brand machines can be Figure 35. Efficient duct layout. substituted with Grizzly machines for layout pur- poses. Note: After you're finished, make sure to save your layout for later modification.
  • Page 27 5" 6" 7" 1200 8" 1600 Shaper Table Saw Planer 9" 2000 Figure 39. CFM requirements labeled for each 10" 2500 machine. Figure 37. Approximate required airflow for machines, based on dust port size. -25- Model G0852 (Mfd. Since 12/18)
  • Page 28 This also allows you to run two machines at once. Experiment with different combinations of blast gates open/closed to find the best results for your system. -26- Model G0852 (Mfd. Since 12/18)
  • Page 29 CFM require- ment for the machine. Use the following tables to calculate the resistance of duct work. -27- Model G0852 (Mfd. Since 12/18)
  • Page 30 STATIC PRESSURE (Inch/H2O) Elbows/Branches 6" 45˚ Y-Branch ........ 0.329 Figure 46. CFM for static pressure loss of line 2 HP GRIZZLY DUST COLLECTOR PERFORMANCE RESULTS 4" 45˚ Elbow ........0.225 connected to a dust collector & router. Max CFM Max SP...
  • Page 31 10.8 (Inch/H The airflow test probe is located 1.5x duct diameter upstream from the air inlet. Test pipe length is a minimum of 10x duct diameter. Figure 47. G0852 performance curve chart and data. -29- Model G0852 (Mfd. Since 12/18)

  • Page 32: System Grounding

    Always guard against stat- External ic electrical build up by Ground Wire grounding all dust collec- tion lines. Internal Ground Wire Ground Screw Flex Hose Figure 49. Flex-hose grounded to machine. -30- Model G0852 (Mfd. Since 12/18)

  • Page 33: Section 5: Operations

    Read books/magazines or get formal training before beginning any proj- ects. Regardless of the content in this sec- tion, Grizzly Industrial will not be held liable for accidents caused by lack of training. -31- Model G0852 (Mfd. Since 12/18)

  • Page 34: Using Controls

    STOP Paddle: Turns main motor OFF by press- ing it once. Filter Cleaning Brush Handle: Before each use, turn filter cleaning brush handle to rotate internal brushes that knock caked-on dust from the canis- ter filter into the filter bag. -32- Model G0852 (Mfd. Since 12/18)

  • Page 35: Section 6: Accessories

    Uses RH fittings. serious personal injury or machine damage. To reduce this risk, only install accessories recommended for this machine by Grizzly. NOTICE Refer to our website or latest catalog for additional recommended accessories.
  • Page 36 4" flexible hose (not included). W1007—Plastic Blast Gate 4" W1053—Anti-Static Grounding Kit D4206 D4216 D4256 W1053 W1007 W1317 W1017 Figure 58. Dust-collection attachments. Figure 60. Dust-collection accessories. www.grizzly.com 1-800-523-4777 order online at or call -34- Model G0852 (Mfd. Since 12/18)

  • Page 37: Section 7: Maintenance

    Remove bag from canister filter and dispose ratory damage. Always of contents. wear goggles and a NIOSH- approved respirator when Place new dust bag on filter. working with the dust col- lection bags or canisters. Re-install bag clamp to secure. -35- Model G0852 (Mfd. Since 12/18)

  • Page 38: Emptying/Replacing Collection Bag

    Emptying/Replacing Washing Canister Collection Bag Filter Dispose of the collection bag when dust fills it The Model G0852 dust collector uses a crank about ⁄ full. Immediately replace the bag if it handle and internal brushes to remove excess develops a leak or becomes damaged.

  • Page 39: Section 8: Service

    5. Impeller damaged or unbalanced. 5. Replace. 6. Motor bearings at fault. 6. Test by rotating shaft; rotational grinding/loose shaft requires bearing replacement. 7. Motor shaft bent. 7. Test with dial indicator. Replace motor if damaged. -37- Model G0852 (Mfd. Since 12/18)
  • Page 40 2. Cylinder or funnel seals are loose or 2. Retighten all mounting and sealing points; replace damaged. damaged seals/gaskets. -38- Model G0852 (Mfd. Since 12/18)

  • Page 41: Removing/Replacing Canister Filter

    Shop Vac ............1 Canister Filter T30321 ........1 Filter Bag T28925 ..........1 To remove and replace canister filter: Filter Cleaning Handle DISCONNECT MACHINE FROM POWER! Assembly Figure 64. Filter cleaning handle fasteners. -39- Model G0852 (Mfd. Since 12/18)
  • Page 42 Brush Spindle Figure 65. Removing brush spindle block from canister filter brush spindle. Figure 66. Canister filter mounted to upper cover. Vacuum loose dust inside upper cover and on machine. Reverse Steps 2–5 to re-assemble. -40- Model G0852 (Mfd. Since 12/18)

  • Page 43: Section 9: Wiring

    Technical Support at (570) 546-9663. The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com. -41- Model G0852 (Mfd. Since 12/18)

  • Page 44: Wiring Diagram

    Always use the wiring diagram here. Purchase required plug inside the motor junction box. from a local hardware store. READ ELECTRICAL SAFETY -42- Model G0852 (Mfd. Since 12/18) ON PAGE 41!

  • Page 45: Section 10: Parts

    109-2 109-1 128 129 75 76 66-1 66-3 66-2 66-4 66-5 66-6 90 91 66-7 66-8 66-9 38 39 164 165 BUY PARTS ONLINE AT GRIZZLY.COM! -43- Model G0852 (Mfd. Since 12/18) Scan QR code to visit our Parts Store.
  • Page 46 FENDER WASHER 5/16 P0852052 HEX BOLT 5/16-18 X 1 P0852096 HEX BOLT 5/16-18 X 3/4 P0852053 FENDER WASHER 5/16 P0852097 EXHAUST PORT BUY PARTS ONLINE AT GRIZZLY.COM! -44- Model G0852 (Mfd. Since 12/18) Scan QR code to visit our Parts Store.
  • Page 47 HEX BOLT 1/4-20 X 1 We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to check for availability. BUY PARTS ONLINE AT GRIZZLY.COM! -45- Model G0852 (Mfd.

  • Page 48: Labels & Cosmetics

    P0852208 TOUCH-UP PAINT, GRIZZLY BEIGE P0852204 DISCONNECT POWER LABEL P0852209 TOUCH-UP PAINT, GRIZZLY GREEN P0852205 EYES-LUNGS WARNING LABEL P0852210 GRIZZLY.COM LABEL BUY PARTS ONLINE AT GRIZZLY.COM! -46- Model G0852 (Mfd. Since 12/18) Scan QR code to visit our Parts Store.
  • Page 49 Would you recommend Grizzly Industrial to a friend? _____ Yes _____No Would you allow us to use your name as a reference for Grizzly customers in your area? Note: We never use names more than 3 times. _____ Yes _____No 10.
  • Page 50 FOLD ALONG DOTTED LINE Place Stamp Here GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 FOLD ALONG DOTTED LINE Send a Grizzly Catalog to a friend: Name_______________________________ Street_______________________________ City______________State______Zip______ TAPE ALONG EDGES--PLEASE DO NOT STAPLE...

  • Page 51: Warranty & Returns

    WARRANTY & RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.

Table of Contents