Section 3: Set Up; Unpacking; Items Needed For Set Up - Grizzly Model G8027 Instruction Manual

This machine presents
serious injury hazards
to untrained users. Read
through this entire man-
ual to become familiar
with the controls and
operations
starting the machine!
Wear safety glasses dur-
ing the entire set up pro-
cess!
The Model G8027 weighs
approximately
(shipping weight). DO
NOT over-exert yourself
while unpacking or mov-
ing your machine—get
assistance.

Unpacking

Your machine left our warehouse in two care-
fully packed boxes. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advice.
Save the containers and all packing materials
for possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of the shipment, you should inventory the
equipment.
G8027 1 HP Dust Collector

SECTION 3: SET UP

BEFORE
67 lbs.
Items Needed For
Set Up
Items Needed for Setup
Wrench or Socket 8mm ..................................... 1
Wrench or Socket 10mm ................................... 1
Wrench or Socket 13mm ................................... 2
Phillips Screwdriver #2 ..................................... 1
Qty
-9-