Code; Home Control; Chime Doors - GE Security Simon User Manual

Note
40 keypresses for invalid
codes (i.e. 10 invalid 4-digit
codes) will cause a system
access alarm. The alarm
locks all touchpads, except
keychains, for 90 seconds.
Simon Security System
don't exit before the exit delay expires, the panel will not arm the motion sensors.
Check with your installer to find out if this feature is enabled for your panel.
If You Forgot Something After Arming
Your panel can be programmed to recognize when you leave the premises then quickly
reenter. The panel will restart the exit delay to give you time to collect your things and
leave again. You must leave before the exit delay expires or disarm the system. Ask
your installer if this feature is enabled for your system.
Arming When the Panel Battery is Low
Your panel may be programmed so that you cannot arm the system if the panel battery
is low. Ask your installer if this feature is enabled for your system.

CODE

There are 5 CODE buttons located in the second row of the panel. Each button repre-
sents 2 numbers. The left CODE button is 1/2, which means that this button is pressed
when entering either 1 or 2. For example, if your access code is 1-2-3-4 you must press
the 1/2 button twice and the 3/4 button twice to enter that access code. Access code
lengths (programmed by the installer) need to be between 3 and 6 digits.

HOME CONTROL

Chime
Doors Motion
Time Sensor
Bypass
The Home Control buttons are used to monitor activity within and around the home.
They are not used for intrusion protection. If any of the Home Control buttons are
pressed and a sensor or module is not associated (programmed) with this feature the
panel will announce, Function not available.

Chime Doors

Chime Doors is used to signal (chime) when a protected door is opened while the sys-
tem is disarmed. The panel will announce the door that has been tripped and chime
twice (ask your installer how this feature is programmed). This is a nice feature to use
if you're busy in one part of your home and you want to know when family members
are going in and out of your home.
¾ Turn Chime Doors on:
System must be disarmed. Press Chime Doors button.
1.
Panel will announce, Chime on. Chime Doors button will be lit.
¾ Turn Chime Doors off:
1. Press Chime Doors button
Panel will announce, Chime off. Chime Doors button no longer lit
On
Off
HOME CONTROL
Lights
5