IC Realtime Network Video Recorder User Manual page 71

Parameter
CAM 1 to CAM
16
Open all /close
all
Start dialogue
Local play
Refresh
Please left click one monitor to view real-time video, the monitor window is shown as in
7-6.
Please refer to the following sheet for monitor window parameter information.
SN Parameter
1-4 Display
device
information
Function
channel 1 to channel 16
Click this button to open all video channels.
Once all video channels are open, it becomes close all button.
You can click this button and then select the corresponding
audio compression mode (default/G.711a) to enable/disable
bidirectional talk function.
Click local play button to select file to play in PC.
Click this button to refresh monitor channel name.
1 2 3 4
11
Figure 7-6 Real-time Monitor
Function
1: NVR IP address.
2: Channel number.
3: Bit stream.
4: Bit stream decode type.
S1: Overlay.
S2: Off stream.
S3:GD1
H1: Overlay
H2: off stream decoding from the display card.
5 6 7 8 910
71
F igure
3 1 2 H