Ntp Setup; Ddns Setup - IC Realtime Network Video Recorder User Manual

5.6.4.4 NTP Setup

You need to install SNTP server (Such as Absolute Time Server) in your PC first. In Windows XP
OS, you can use command "net start w32time" to boot up NTP service.
NTP setup interface is shown as in
Server IP: Input your PC address.
Port: This series DEVICE supports TCP transmission only. Port default value is 123.
Update period: minimum value is 1. Max value is 65535. (Unit: minute)
Time zone: select your corresponding time zone here.
Here is a sheet for your time zone setup.
City /Region Name
London
Berlin
Cairo
Moscow
New Deli
Bangkok
Beijing (Hong Kong)
Tokyo
Sydney
Hawaii
Alaska
Pacific Time(P.T)
American Mountain Time(M.T)
American Central Time(C.T)
American Eastern Time(E.T)
Atlantic Time
Brazil
Middle Atlantic Time

5.6.4.5 DDNS Setup

DDNS setup interface is shown as in
You need a PC of fixed IP in the internet and there is the DDNS software running in this PC. In
other words, this PC is a DNS (domain name server).
In network DDNS, please select DDNS type and highlight enable item. Them please input your
PPPoE name you get from you IPS and server IP (PC with DDNS ) . Click OK button, system
prompts for rebooting to get all setup activated.
After rebooting, open IE and input as below:
Figure 5-24
F igure 5-25. Please note it supports TCP transmission only.
2 8 0 H
Time Zone
GMT+0
GMT+1
GMT+2
GMT+3
GMT+5
GMT+7
GMT+8
GMT+9
GMT+10
GMT-10
GMT-9
GMT-8
GMT-7
GMT-6
GMT-5
GMT-4
GMT-3
GMT-2
Figure 5-25
F igure 5-26.
2 8 1 H
49