Advanced Setup; Ip Filter; Pppoe - IC Realtime Network Video Recorder User Manual

5.6.4.1 Advanced Setup

Advanced setup interface is shown as in
corresponding function and then double click current item to go to setup interface.

5.6.4.2 IP Filter

IP filter interface is shown as in
Please note after you enabled this function, only the IP listed below can access current device.
If you disable this function, all IP addresses can access current device.

5.6.4.3 PPPoE

PPPoE interface is shown as in
Input "PPPoE name" and "PPPoE password" you get from your ISP (Internet service provider).
Click OK button, you need to restart to activate your configuration.
After rebooting, device will connect to internet automatically. The IP in the PPPoE is the device
dynamic value. You can access this IP to visit the unit.
F igure 5-22. Please draw a circle to enable
2 7 7 H
Figure 5-22
F igure 5-23. You can add IP in the following list.
2 7 8 H
Figure 5-23
F igure 5-24.
2 7 9 H
48