S Series - IC Realtime Network Video Recorder User Manual

Port Name
Network port
eSATA eSATA port
USB port.
RS232 232 debug
COM.
HDMI High definition
multimedia
interface
VGA VGA video
output port

2.2.3 S Series

The S series NVR rear panel is shown as in Figure 2-6.
Please refer to the following sheet for detailed information.
Port Name
Power button
Power input
port
Connection Function
power to the peripheral devices such as
camera or alarm device. The connected device
current shall be less than 1A.
10M/100M self-adaptive Ethernet port. Connect
to the network cable.
The external SATA port. It can be connected to
the peripheral devices of SATA port.
Please pay attention to the HDD jumper when
you connect the external HDD.
Connect to USB mouse.
It is for general COM debug to configure IP
address or transfer transparent COM data.
High definition video signal output port.
Transmit the clear video and multiple-track
data (Uncompressed)to the device of
HDMI(High definition media interface)
VGA VGA video output port. Output analog video
signal. It can connect to the monitor to view
analog video.
Figure 2-6
Connection Function
Power on/off button.
Input AC 220
21