Default - IC Realtime Network Video Recorder User Manual

Hide thumbs Also See for Network Video Recorder:
Table of Contents

Advertisement

Parameter
Function
Time display
You can select to display time or not when system is playback.
There are four options: 1280×1024(default),1280×720,1024×768,800×600.
Resolution
Please note you need to reboot to activate current setup.
Enable tour
You can highlight the box to activate tour function.
Interval
Please input proper interval value here. The value ranges from 5 to 120
seconds.
1-16
Once you enable the tour function, you need to set the tour channels. System
supports 1/4/9/16 window(s) tour.
Right now, system supports 1-window tour when alarm occurs.
Alarm tour type
In tour mode, you can see the following interface. On the right corner, right click mouse or click
shift button, you can control the tour. There are two icons:
and
stands for enabling window function. See

5.6.8 Default

Click default icon, system pops up a dialogue box. You can highlight
setup. See
F igure 5-34.
2 8 9 H
Select all
General
Encode
Schedule
RS232
Network
Alarm
Detect
Pan/tilt/zoom
Display
Please highlight icon
Figure 5-33
to select the corresponding function.
stands for enabling window switch
F igure 5-33.
2 8 8 H
to restore default factory
54

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Network Video Recorder and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents