IC Realtime MNVR-EL04 Quick Start Manual

Mobile Network Video
Recorder MNVR-EL04
Quick Start Guide V.1.00
Table Of Contents
Getting Started
A. Inspecting the Components
B. Front/Rear Panel Identification
Device Setup
A. Initial Setup
B. Startup and Initialization
Camera Operation
A. Adding IP Cameras
Remote Access
A. P2P setup to Phone App
Port Explanation
A. Port Interfaces
Appendices
A. FAQ
B. Cybersecurity Recommendations
www.icrealtime.com
IMPORTANT SAFEGUARDS AND WARNINGS
Operating Requirement
Install the PoE front-end device inside a vehicle.
●
The Device support in-dash automotive installation
●
Do not place and install the device in an area exposed to direct sunlight or near heat
●
generating devices.
Do not install the device in a humid, dusty or fuliginous area
●
Keep its horizontal installation, or install it at stable places, and prevent it from
●
falling.
Do not drip or splash liquids onto the device; don't put on the device anything filled
●
with liquids, in order to prevent liquids from flowing into the device.
Install the device at well-ventilated places; don't block its ventilation opening.
●
Use the device only within rated input and output range
●
Do not dismantle the device arbitrarily.
●
Transport, use and store the device within allowed humidity and temperature range.
●
Electrical Safety
Improper battery use might result in fire, explosion, or inflammation.
●
When replacing battery, make sure the same model is used.
●
Use the recommended power cables in the region and conform to the rated power
●
specification
Use the power adapter provided otherwise, it may result in injury and device damage.
●
The power source shall conform to the requirement of the Safety Extra Low Voltage
●
(SELV) standard, and supply power with rated voltage which conforms to Limited
power Source requirement according to IEC60950-1. Please note that the power
1
supply requirement is subject to the device label.
Connect the device (I-type structure)to the power socket with protective earthing.
2
●
1A. Inspecting the Components
3-5
Items Detail
6
Package
●
●
●
6
7
Labels
●
8
Device
●
9
●
10
Inspect
Appearance Any obvious damage on box
●
Packing Materials Broken or distorted positions due to physical abuse
●
Accessories The accessory box should have all materials (ie:
●
Security Key, extra cables, connectors, Power cord)
Labels Containing the The serial numbers on the Labels are in vital in
●
Serial Number are tracking the device in our database. Ensure they are
located on Device and not torn or lost.
in box
Appearance Any obvious damage
●
Data, power, and fan Loose connections
●
cables, mainboard