Network Storage; Alarm - IC Realtime Network Video Recorder User Manual

Then select
DNS item
here.

5.6.4.7 Network Storage

Go to the network setup menu; select the network storage item in the advanced. Network storage
interface is shown as below. See
Please highlight the FTP item to enable FTP function. And then set the FTP server IP address,
port number. And then input the user name and password needed to login the FTP.
Now you can upload the local recorded file(s) to the corresponding server.

5.6.5 Alarm

Note
Please make sure you have connected the alarm input device and alarm output device to the
corresponding input port and output port.
Go to the system setup interface and then select the alarm setup item; you can see the following
interface. See F igure 5-30.
2 8 5 H
Please select the alarm type from the dropdown list. There are two types: local alarm and net
alarm. The local alarm is from your local alarm device and net alarm is from the network.
Then you can select the corresponding alarm input port and alarm output port. Select the alarm
type (NO/NC) and finally set the alarm period.
Once there is an alarm occurred, system can enable the corresponding channel to record and
activate the preset function such as go to preset X, or system can pop up alarm message in the
Figure 5-28
F igure 5-29.
2 8 4 H
Figure 5-29
First, please enable
DHCP function here.
51