Rear Panel; A Series - IC Realtime Network Video Recorder User Manual

Icon

2.2 Rear Panel

2.2.1 A Series

The A series NVR real panel is shown as in Figure 2-4.
Please refer to the following sheet for detailed information.
Port Name
RS232
VGA
1～16
Name
Down/4
Left/2
Right/3
Power
USB port
Connection
USB port.
Network port
232 debug
COM.
VGA video VGA
output port
Alarm input port. I/O port
1～16
Function
activated control, Assistant function such as PTZ
jumping to menu.
up/down/left/right.
In text mode, input number 1/4
(English character G/H/I)
When
buttons to control playback bar.
In text mode, input number
2(English character A/B/C)
/3(English character D/E/F)
Power button, press this button to boot up or shut
down NVR.
To connect USB storage device, USB mouse.
Figure 2-4
Function
Connect to USB mouse.
10M/100M self-adaptive Ethernet port. Connect
to the network cable.
It is for general COM debug to configure IP
address or transfer transparent COM data.
VGA video output port. Output analog video
signal. It can connect to the monitor to view
analog video.
Four groups of alarm input ports. The first
group is from port 1 to port 4, the second
group is from port 5 to port 8, the third
group is from 9 to 12, and the fourth group
is from 13 to 16. They are to receive the
signal from the external alarm source.
There
playback, click
are two types;
18
these
NO (normal