• Domain Name: Enter the domain name created in step 8.
• User: Enter your username (email address) created in step 3.
• Password: Enter the password created in step 3.
The figure Configuration file of No-IP is shown as in
12. Now you have completed device setup. Open Internet Explorer ® in another foreign network with Internet
access, unlike the network where the device is connected to, you need to follow the steps listed below:
1. Enter the address into your browser: http://nome the field created in step 8. For example:
h ttp://vd16s480st.no-ip.biz
1 1 5 H
2. If the device HTTP port is 80, just type the domain name. Otherwise, enter in the browser address as:
http://nome the field created in Step 8: port number of HTTP. For example:
h ttp://vd16s480st.no-ip.biz:9090
1 1 6 H
3. Press Enter. The system will ask install application webrec.cab control or not. Please click Yes to perform
a successful connection.
4. If the page does not appear on the computer screen, you need to lower your system safety setup. From
Tools> Internet Options> Security, select Internet and then click Custom Level, you can enable ActiveX
controls. See
F igure 13-12 . Then open your browser and re-enter the domain name of the device.
3 5 3 H
F igure 13-11.
3 5 2 H
Figure 13-11
117
Need help?
Do you have a question about the Network Video Recorder and is the answer not in the manual?