Alarm Output - IC Realtime Network Video Recorder User Manual

Parameter Function
There are several options for you such as disk error, no disk, disconnection,
Event type
IP conflict and etc.
Please highlight the enable button to activate current function.
Please select alarm activation output port (multiple choices).

Alarm output

The 6
Latch Here you can set corresponding delaying time. The value ranges from 10s-
300s. System automatically delays specified seconds in turning off alarm and
activated output after external alarm cancelled.
System can pop up the message in the local screen to alert you when alarm
Show
occurs.
message
Send email System can send out email to alert you when alarm occurs.
5.7.3 Alarm Output
Here is for you to set proper alarm output.
Please highlight icon
After all the setups please click OK button, system goes back to the previous menu. See
5-38.
Parameter Function
Alarm type You can set alarm mode, schedule alarm, enable or disable the alarm output
port manually.
Figure 5-37
th
channel is the controllable 12V output.
to select the corresponding alarm output.
Figure 5-38
F igure
2 9 3 H
57