Troubleshooting; Circuit Breaker; Fuses - Shoprider S-889NR User Manual

Continued.....
Wheels and Tyres
The wheels of your scooter have split rims. This allows any punctures to be
repaired easily.
To change the wheels, remove the centre bolt and slide the wheel off its axle.
Ensure that when refitting the wheel the retaining nut is fitted with a locking
washer or the screw threads are treated with 'Loc-tite' or a similar thread
locking compound. When changing a tyre the inner tube must be deflated.
Remove the four bolts from the wheel and slit the rim. Tyre pressure is
recommended to be kept at 30psi on the rear and 25psi on the front tyres.
Note: Regularly check and maintain these tyre pressures as low tyre
pressure can reduce the range of your scooter.
Product Life Expectancy
Your scooter has been designed to provide the user with a long, reliable life
provided it is correctly maintained and regularly serviced by an authorised
dealer. However, due to inevitable wear and tear and technological
improvements it is recommended that the average usable life of this scooter is
five years.
Note: Should any parts need replacing during routine maintenance
please consult your local Dealer for approved spare parts for your
scooter. Failure to do so may damage the scooter and void your
warranty.

Troubleshooting

Circuit Breaker

Your scooter is fitted with the latest in electronic controls that are programmed
to protect the electrical system from abnormal overloads. Fitted for extra
protection is a circuit breaker. Should there be a situation where your scooter
stops for no apparent reason please check that the circuit breaker has not
tripped. The circuit breaker is located is located through a hole in the shroud
underneath the seat behind the seat post (Fig. 6). Press this button to reset
the circuit breaker.
Note: Should the circuit breaker continue to trip turn off the scooter
immediately and consult your dealer.

Fuses

There are two 40 amp blade type fuses inside the battery pack to give
protection against possible overload on the wiring.
Note: Should the fuses need replacing please contact your dealer
to ensure the correct sizes are fitted. Failure to do so could result
in peShopridernent damage to the scooter's electronics and
possibly cause a fire hazard. Failure to do this will void your warranty.
14